Every electronic device emits electromagnetic energy, and every electronic device can be disrupted by it. As vehicles, aircraft, medical equipment, and communications hardware pack more electronics into tighter spaces, keeping that energy where it belongs — electromagnetic interference (EMI) shielding — has become a significant engineering market.
The incumbent solution is metal: enclosures, foils, meshes, and metallised coatings. Metal works very well. It is also heavy, can corrode, and is difficult to form into complex lightweight parts. That is the opening for conductive carbon materials, including graphene.
How Shielding Works
A shield reduces the electromagnetic energy passing through it in three ways:
- Reflection. Mobile charge carriers in a conductor reflect incoming waves. This dominates in metals.
- Absorption. Energy is converted to heat as the wave passes through a lossy material. Thicker and more lossy materials absorb more.
- Multiple internal reflection. In porous or layered materials, waves bounce repeatedly between internal surfaces, losing energy each time.
Shielding effectiveness is expressed in decibels. Each 10 dB is a tenfold reduction in power: 20 dB blocks 99% of incident power, 30 dB blocks 99.9%, and 60 dB blocks 99.9999%. Many commercial applications require somewhere in the 30–60 dB range; demanding military and aerospace applications require more.
What Graphene Brings
Conductivity in a lightweight form. Graphene and graphene nanoplatelets form conductive networks in polymers at low loadings, turning an insulating plastic into a shielding material without the weight of metal.
Absorption-dominated shielding. Graphene composites tend to shield more by absorption than metals do. That matters in applications where reflected radiation causes its own problems — for example, inside a crowded enclosure where reflected energy can interfere with neighbouring components.
Thin films and coatings. Graphene films and coatings can add shielding to existing parts, including plastic housings, fabrics, and composite panels.
Corrosion resistance. Unlike metals, carbon does not corrode in the usual sense, which helps in marine and outdoor environments.
How It Compares
Versus metal. Metals remain hard to beat on shielding per unit thickness. A thin metal layer delivers very high shielding by reflection. Graphene composites usually need more thickness to match it. The case for graphene is weight, formability, and corrosion resistance, not raw performance.
Versus carbon black and carbon fibre. Carbon black is cheap and widely used for static dissipation but needs high loadings to reach meaningful shielding, which harms mechanical properties and processability. Carbon fibre composites shield reasonably well, especially in aerospace laminates. Graphene can reach a conductive network at lower loading than carbon black and can be combined with carbon fibre to improve shielding at joints and in resin-rich regions.
Versus carbon nanotubes. Nanotubes form conductive networks at very low loadings and are strong competitors. Mixtures of nanotubes and graphene platelets often outperform either alone, because tubes bridge between platelets.
Versus MXenes. Thin MXene films have shown shielding comparable to metal foils at very small thickness, as noted in our article on materials beyond graphene. They remain more expensive and less stable in air, but they are serious competitors for thin-film shielding.
Where It Is Being Used
- Automotive electronics housings, especially in electric vehicles, where high-voltage power electronics create strong interference and weight matters for range.
- Aerospace, where composite structures need lightning protection and shielding without the weight penalty of metal mesh.
- Telecom and 5G hardware, where higher frequencies demand effective shielding in compact devices.
- Medical devices and wearables, where flexible, thin shielding layers are useful.
- Shielding fabrics and gaskets, where flexibility and conductivity both matter.
Frequency Matters
A shielding figure is meaningful only at a stated frequency range. A material that performs well in the X-band (8–12 GHz), where much research is reported, may behave differently at the lower frequencies relevant to power electronics, or at the higher frequencies used in newer communications standards. Ask for data across the frequency range that matters for your application.
How to Evaluate a Claim
- What thickness? A 60 dB claim on a 5 mm panel and on a 50 µm film describe very different materials.
- What frequency range? Check it matches your interference source.
- What loading of graphene? High loadings may deliver the number but ruin mechanical properties or cost.
- Reflection versus absorption split? This matters if reflected energy is a concern.
- Was it measured on a moulded part? Processing can align or break conductive networks. Test parts made by your actual process.
- How does it age? Conductive networks can degrade with thermal cycling and humidity. Ask for data after environmental conditioning.
Bottom Line
Graphene will not replace metal shielding where thin metal does the job. It offers a credible route to lightweight, corrosion-resistant, mouldable shielding in plastics and composites — particularly in vehicles and aircraft, where every gram counts. The winning formulations will probably be hybrids, combining graphene with nanotubes, carbon fibre, or conventional fillers.
This article is part of our Applications series. For suppliers active in this space, see The Top 10 Graphene Companies to Watch in 2026.